With some super handy and diverse functions such as edge-smoothing, levelling out reclaimed timber and chamfering handrails and posts, the planer is a time saver which is a great additional to any tool collection.


As with all power equipment, make sure you wear adequate protective clothing – for a planer that’s eyewear and ear protection.

It’s always a smart idea to clamp the materials down before operating the tools to ensure both of your hands are free to control the tool at a safe and steady pace. After turning the tool off, protect yourself and your workpiece by waiting for the blade to stop spinning before you place the tool down on your workbench.


Start by resting the planer’s front shoe flat on the timber piece without allowing the blade to contact your workpiece. Start the planer and let the engine reach maximum speed, then ease the planer into touch with the workpiece and drive it forward slowly – letting the planer blades do the work. Apply greater pressure on the rear handle when you lift the planer off the timber workpiece. This will reduce the possibility of creating gouges at the end of a pass.


Our PXC 18V Cordless Planer delivers smoother surfaces and straightened edges, all while not having to worry about annoying cords and extension leads. Take this tool from project to project around the house, shed, garage or studio, with the ease of our PXC battery technology. You’ll get up to 21mins* of timber planing on a single charge. *Runtime is determined in ideal conditions with a fully charged 5.2Ah battery, planning 50x1mm chips in pine with the supplied blades.

Check out the PXC 18V Cordless 82mm Planer, available at your local Bunnings – online or in store today.